The High Performance Window And Door Company

096 22147

|

The High Performance Window And Door Company

PVC Windows

Your home is more than likely the single most significant investment you will make in your life and choosing the right windows and doors is an integral part of making your home secure, warmer, air tight, energy efficient, stylish, and virtually maintenance free.

Our windows are designed and manufactured on site at our factory in Ballina, we are a family business so at the end of the day it's important that the product we are sending out is the best we can achieve, built to last!! . We seldom make changes to the product but generally when we do, its to keep ahead of the times whether its in energy efficiency, security or whatever it may be importantly its to stay at the top in quality window and door manufacturing.

Quality is never compromised by cheap hardware, profiles, seals or glazing. Most windows produced today are, whether if it's with co-extruded seals (explained below) or security locking but it always worth doing that research first.

The main aspects we tend to promote as individual to ourselves are below, these aspects are better explained further down the page to fully understand what there all about.

A RATED ENERGY EFFICIENCY
INTERNAL GLAZING
QLON SYNTHETIC SEALS (not co-extruded)
4 TO 8 POINT SECURITY LOCKING
HEAVY DUTY STAINLESS HINGES
THERMAGLAZE DOUBLE OR TRIPLE GLAZING
AIR TIGHTNESS
5 CHAMBER PVC PROFILE
FOAM FILLED FRAME OPTIONAL
NO MECHANICAL JOINING, FULLY WELDED
ELEGANT STYLE
10 YEAR GUARANTEE

A-Rated as Standard

We use a 5 chamber frame with our Thermaglaze glass, these combined with air tightness give the A rating. A rating means your heat stays in the house for longer without the need for as much fuel, average home can save up to 400 euro a year.

Energy rated performance glass

All our windows are fitted with our THERMAGLAZE double or triple glazing as standard assembled using a warmedge spacer bar

Internal Glazing

The glazing is all done from the inside meaning it cannot be removed easily from the outside by any potential intruder.

Qlon Synthetic Seals

We don't use rubber seals on our windows or mechanical applied seals due to the known fact that they can perish and deteriorate in a short space of time. Mechanically (co-extruded) applied seals have more of a chance of failure and cannot be replaced.

They are an integral part of the window and are welded at the joints, straight away or a couple years on, serious problems are known to occur. Known problems are shrinking, bleeding discolouring the window, perishing causing static seals which dont perform. These common problems cause draughts which means energy rated glass and energy efficient frame are useless.

We use a synthetic seal (Qlon)which does not have these common problems, year after year they hold there memory making sure your heat stays in the house where it should be. They are made up of a a nylon exterior wall with a high density memory foam centre.

Below are some examples, pic on the left shows a plastic packer used as a guide to show hard a hard corner where the gasget has little compression and on the right it shows a perfect level compression.

High Security Locking

We use high security locking on all openings, they range from 4 to 8 points depending on the size of the opening, this not only offers great security but enhances the air tightness on the window.

Heavy Duty Hinges

Heavy duty hinges on side openings are very important, these sashs have alot of weight to carry and are most commonly used. Many different types of hinges fail in this area causing draughts and eventually fail to close at all.